Interactive Demo

Try the Print Kiosk

Tap a part, pick a printer, and watch a job run — start to finish. Then use the switches below to add optional hardware modules and see how the same interface adapts.

Additive
Manufacturing Center

Ready

Select a Print

Tap an item to begin.

Select a Printer

Choose which printer to send your part to.

Now Printing

—

0%Complete

Prep Printing Cool-down

—

Time Left

Preparing

Stage

Print Complete

It's okay to open the printer door and remove your part.

Print Stopped

The print job was cancelled. Please check the print bed before starting a new job.

Building the Future Together

Is the printer clear of all items and obstructions?

Check that the build plate is empty and nothing is blocking the print head.

Please Close the Printer Door

Close the door fully and the print will begin automatically.

Stop the current print?

This cancels the job. The part may be unfinished.

Sending job to printer…

Please wait.

Wall-mounted iPad · portrait kiosk

Hardware add-on modules

The core kiosk runs on any supported printer. These are optional modules — flip one on to see exactly how the interface changes.

Door sensor & safety lock

Inductive door sensor + fail-safe electromagnetic lock. Adds a "close the door" step, locks during printing, and keeps it locked through cool-down.

Simulate the door left open

Status tower light

Red / amber / green stack light beside the printer — green when free, amber while printing, red when it needs attention. Visible across the room.

Second printer

Run two machines from one kiosk. Students pick an available printer; busy ones gray out with live time remaining.

Cool-down period

A timed cool-down with fans running after each print, so parts and the nozzle are safe to handle before the door opens.

This is a simulation for demonstration — no printer is connected, and print times are compressed to a few seconds.

White-label: logo, colors, catalog, and copy are all configurable per site. This demo uses neutral placeholder branding.